PLC34 - Plinth Standpipe with 3/4” Brass Bib Tap
- High quality stainless steel construction.
- Solid DZR brass internal plumbing.
- Lockable and secure.
- WRAS approved OEM backflow prevention device.
- Suitable for fluid category 3 risk.
- Simple MDPE push fit connection.
Manufactured in high quality stainless steel, the PLC34 is the definite choice for a safe and secure water supply.
The PLC34 standpipe is ideal for all areas of public access. This includes retail parks, private and public spaces, residential, recreational spaces, marinas, caravan sites, vehicle washing stations and allotments.
The PLC34 is fitted with Edwards Engineering’s own WRAS approved OEM backflow prevention device (WRAS 1912015), which includes a double check valve. This is suitable for applications that require protection against a Fluid Category 3 risk.
The high quality stainless steel shell offers: longevity, durability, pleasing aesthetics and features a lockable cover for vandal resistance.
Internal parts are all made of high quality DZR Brass and conform to industry water standards.
Installation and Maintenance
The PLC34 is designed to be connected above ground. The unit should be bolted directly to a flat concrete or similar hard standing surface using 4 x suitable coach or expansion bolts (not supplied).
The PLC34 also incorporates a servicing valve, which can be accessed by either removing the front or back maintenance panels with the supplied Allen key.
Although this unit has been designed to accommodate fluctuations in severe weather conditions, it is important that in extreme cold weather, it is recommended that the service valve is shut off and the outlet tap is left open.
Please call 01584 861223 or firstname.lastname@example.org for further information.
N.B. The water user must decide upon the backflow requirements necessary for each installation.
PLC34 Standpipe Specification:
|Material||Brushed Stainless Steel (Grade 304 - 1.5mm Thickness)|
|Unit Section||110mm x 130mm|
|Outlet Tap Cover||250mm x 180mm x 130mm|
|Stabilising Base Plate||250mm x 230mm|
|Blackflow Prevention||3/4” OEM Double Check Valve & Isolation Valve - DZR Brass Body. (Edwards Engineering Ltd - WRAS 1912015)|
|Outlet Tap||3/4” Brass Bib Tap|
|Inlet Connection Type||25mm B Push DZR Brass Coupler|
|Mains Connection||25mm MDPE (Not Supplied)|
|Pressure Supply||10 bar maximum|
|Insulation||Polyflex expanded foam or equivalent insulator, giving protection down to -5 degrees Celsius|