Allotment ½

­­­Water supply standpipes designed for mains connection below ground level.

Manufactured in high quality stainless steel. The Edwards allotment models offer the advantage of ground-based installation, while still offering a safe and secure water supply.

The units are manufactured with quality and security in mind. The internal plumbing is heavily insulated and offers protection against climatic change, however, during severe cold weather conditions it is recommended that the unit should be drained to avoid frost damage.

Also Available with TYPE ESRS Self Regulating Heating Tape (Wattage: 10Watts @ 10DegC ; Voltage: 240V). www.eshltd.com

Please call 01584 861223 or email for further information.

N.B. The water user must decide upon the backflow requirements necessary for each installation.

Product Specification:

­

Main Body	Fabricated Stainless Steel offering strength, durability and corrosion resistance
Unit Length	1470mm, (720mm profile above ground level, with 750mm installed below ground)
Unit Section	100mm x 100mm
Stabilising Base	300mm x 300mm
Mains Connection	25mm MDPE pipe­
Internal Rising Main	22mm Hep2.0 barrier pipe, incorporating in-line D.C.V
ISO Valve	Full Flow Isolating Valve
­Drain Off Tap	Type A. Brass drain valve
­Outlet Tap	BS1010 approved 15mm brass bib tap
Insulation	Polyflex expanded foam or equivalent insulator, giving protection down to -5°C

---

• Download Allotment ½ PDF
  If you don't have Adobe Acrobat you can DOWNLOAD ADOBE ACROBAT HERE.­ ­